Borg Warner S300SX-E SuperCore Assembly 8776 64.47mm / 2.54″ Compressor Inducer Dia.

$701.76

Turbine Housing: *

Description

Borg Warner S300SX-E SuperCore Assembly 8776 64.47mm / 2.54″ Compressor Inducer Dia.

The BorgWarner SXE 64.47 better known as the “64.5” works great for all stock and modified diesel pick-ups. Towing power is increased as well as lower EGTs over stock charger trucks. For stock application 6.0, 6.4, 5.9 and 6.6 diesel trucks use .91 housing. For modified applications ( bigger injectors, cam, head work),stock 7.3 diesel applications, OR 6.6 Duramax applications use 1.0 housing. On a stock application 6.0 and 5.9 with .91 housing we’ve seen first hand spool time at about 1500-1800 rpm depending on tuning and gear ratio. For a mild upgrade to 650hp this charger supports it all!

For Ford 6.0 Diesel applications this unit is a strait bolt in using your factory intake, downpipe, and intercooler piping while using a T4 mount kit. No other modification is needed and works with most aftermarket 4″ downpipes.

For 5.9, 6.6, 6.4, and 7.3 diesel applications this unit requires modified intake, downpipe, intercooler pipes and mounting.

For all applications we recommend you use custom tuning.

 

Free Shipping!

 

S300SX-E SuperCore Assembly 8776

64.47mm / 2.54” Compressor Inducer Dia.
87.37mm / 3.44” Compressor Wheel O.D.
67.56mm / 2.66” Turbine Exducer Dia.
76.20mm / 3.00” Turbine Wheel O.D.
2.5″ Straight Compressor Outlet
360 degree thrust bearing
Integrated speed sensor port
Forged milled compressor wheel
Flexible compressor cover outlet options
Pre-machined boost port

Optimized compressor cover aerodynamics

 

Additional information

Weight 25.00 lbs
Dimensions 0.00 × 0.00 in

Reviews

There are no reviews yet.

Be the first to review “Borg Warner S300SX-E SuperCore Assembly 8776 64.47mm / 2.54″ Compressor Inducer Dia.”

Your email address will not be published. Required fields are marked *

13 + six =